News

Steps to operate stone engraving machine

2021-07-19

When we operate the stone engraving machine, we should master the operation of the stone engraving machine skillfully, which will correct the operation and reduce the mistakes in the operation.

  1. Before starting the stone engraving machine, the operator needs to determine whether the machine tool is properly connected with the computer. Then the operator turns on the machine power and the computer power. After the system is started, enter the numerical control system.
  2. 2. After opening the control system, select the menu of "Back to Mechanical Origin". The machine will automatically return to the mechanical origin and correct the system coordinate system. The user does not have to perform a mechanical reset when restarting the previous operation if the last exit was normal during the operation. When the system exits normally, the current coordinate information will be saved. Alternatively, if the user confirms that the current location is correct, this action may not be performed.
  3. Before performing the work, the operator will generally load the required machining procedures, if not to do so, it will affect the work. Select "open open (F) | (O)..." Menu, will pop up the Windows standard file manipulation dialog box, at this time can continue the next work. When the Open button is clicked, the machine is loaded into the system.

Determine the workpiece origin. The X and Y directions of the stone engraving machine go to the origin position manually, select the menu of "set the current point as the origin of the workpiece", or clear the coordinate value of the current position in the coordinate window, so that the current position is taken as the starting point for processing in the execution of the processing program.