Do you understand the notes for woodworking engraving machine?


When we use woodworking engraving machine, we need to pay attention to the use of engraving machine.

  1. After setting the engraving position, the X, Y and Z axis workpiece coordinates must be all classified as "0".
  2. adjust the engraving speed and spindle motor speed, engraving speed should not be too fast or too slow.
  3. When automatic knife setting, pay attention to the knife block must be insulated from the engraving machine aluminum table.
  4. When you are carving, if you are not sure about the first cut or if you are afraid of making a mistake, you can slow down the feed speed. When you feel the engraving is working, reset the speed back to normal. And you can also let the engraving machine in the empty simulation engraving, to see if it is normal.
  5. If the equipment is not used for a long time, it should be refueled regularly to ensure the flexibility of the equipment.
  6. The continuous running time of woodworking engraving machine cannot exceed 10 hours/day; Ensure the cleaning of the cooling water and the normal work of the water pump, do not let the water-cooled spindle motor appear water shortage phenomenon, and do not let the water temperature is too high.
  7. When the woodworking engraving machine is finished, the dust on the platform and the transmission system must be cleaned up. And regularly lubricate X, Y and Z axes of the transmission system.
  8. Operators should wear relevant masks and protective glasses during operation to avoid dust which will cause harm to the body during processing.
  9. Woodworking engraving machine need to add dust removal device, and regularly take upkeeping.

Jinan Mingshi Machinery Equipment Co., Ltd is a mask machine, CNC router machine equipment manufacturer, then there is a need for KN95 mask machine customers can come to the factory for consultation, which will also help to choose a good machine.